Error
      Back to home
      1. Knowledge Base
      2. Software
      3. Error

      I received the message: Table markers were not found. 0xE000:02

      The turntable and cables must be secured and correctly used during calibration.

      • Verify that the cables are not loose
      • Verify USB connections: If a USB hub or splitter is used they should be powered, if not then connect each cable directly and try again
      • Verify that the turntable is empty during calibration
      • Do not switch between near and far scanner position between calibration and actual scanning

      If the error persists, please contact us for further information.